 |
The PU-8H8HBTL is an 8x8 HDMI HDBaseT™ Lite Matrix. Installers can switch and distribute up to 8 HDMI sources, and 2-Way IR to lengths of up to 60m using CAT5e/6/7 cable infrastructure. Control of the matrix is via IP, RS-232, IR remote, or manual selection buttons. |
 | The PU-1H2BTE splitter accepts 1x HDMI input and distributes to 2 HDBaseT™ outputs, plus 1 HDMI bypass output. The HDBaseT™ outputs allow uncompressed HDMI, LAN, PoE, IR, and RS-232 signals to be transmitted over a Single CAT5e/6/7 cab le up to 100m |
This 4 by 4 HDMI HDBaseT™ Matrix with two additional simultaneous HDMI outputs supports the transmission of video (resolutions up to 1080p Full HD and 1920x1200@60Hz), multi-channel digital audio and control via IR, RS-232 or Web GUI/Telnet IP from four high defini...
The PU-507-WPRX Wall Plate Receiver allows uncompressed HDMI signals and IP data to be received over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, LAN, IP Control, 2-way IR, and Power over Ethernet (PoE) functionality over the same C...
This 4 by 4 HDMI HDBaseT™ Lite Matrix with two additional simultaneous HDMI outputs supports the transmission of video (resolutions up to 1080p Full HD and 1920x1200@60Hz), multi-channel digital audio, and control via IR, RS-232, or Web GUI/Telnet IP, from four ...
The AU-A300 is a compact 2 channel amplifier that is perfect for providing high quality audio distribution into remote AV zones. This solution can integrate audio from a CYP matrix input, local inputs (I-Pod and MP3 etc) and even the TV which is growing in p...
The PU-514-KIT allows uncompressed HDMI, 2-way IR, and RS-232 signals to be transmitted over a Single CAT5e/6/7 cable to distances of up to 60m.
The DS-MP1000 media player is a comprehensive content management system that provides the platform for any integrated digital signage system. Using a compact, low voltage static state PC as the hardware backbone and an intuitive browser based content management syste...
The EL-5400 is a HDMI, VGA, and Display Port presentation switcher with added 3D to 2D conversion capabilities. This device can scale and switch HDMI, DisplayPort, PC and Component inputs to its HDMI output, with their associated audio signals to the native resolutions supported by the connected display. Control is via the IR remote, or RS-232 protocol.
The AU-D250 is designed to integrate and convert both analogue and digital audio signals into any AV system. This device has an in-built sample rate converter which can upscale audio signals between 44.1kHz to 192kHz (24 bit).