PU-1H2HBTE 1 HDMI to 2 HDBaseT™ Splitter (100m) including additional HDMI output

SKU: PU-1H2HBTE

Overview

The PU-1H2BTE splitter accepts 1x HDMI input and distributes to 2 HDBaseT™ outputs, plus 1 HDMI bypass output. The HDBaseT™ outputs allow uncompressed HDMI, LAN, PoE, IR, and RS-232 signals to be transmitted over a Single CAT5e/6/7 cable up to 100m. Installers can confidently distribute HDMI signals to 3 displays, and if required, use the HDMI bypass output to cascade the HDMI signal up to 5 times with additional HDBaseT™ splitters.

PU-507RX Receivers are recommended to utilise the full 5-Play™ functionality of the HDBaseT™ outputs of this device.

Specification

Supports all v1.4 HDMI resolutions plus 4K
HDMI, HDCP, & DVI compliant
Supports uncompressed video/audio up to 10.2Gbps
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports HDCP repeating and CEC functions
Supports 1080p distances up to 100 meters through CAT5e/6 cables
Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
Supports full 5-Play™ Convergence : HDMI / LAN / PoC (Power over Cable) / IR / RS-232
Supports 3D signals
Supports 4K/2K & 4K UHD - CAT5e/6 = 70m & CAT6a/7 = 100m

Inputs	1x HDMI [1x HDMI Uncompressed AV and Data] 2x 3.5mm Stereo mini-jack [2x RS-232] 2x 3.5mm Stereo mini-jack [2x Infra Red Receiver]
Outputs	1x HDMI [1x HDMI Uncompressed AV and Data] 2x RJ45 [2x HDMI & Propriety Data] 2x 3.5mm Stereo mini-jack [2x Infra Red Emitter] 1x RJ45 [1x Ethernet (I/O) IP]
PSU:	24V/2.7A
Dimensions	145mm [W] x 160mm [D] x 30mm [H]
Net Weight	530g
Gross Weight	700g