Overview
The PUV-1610TX Transmitter enables transmission of video resolutions up
to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
transmitted simultaneously over a single CAT6a/7 cable up to 100m.
A key feature of the PUV-1600 series is that the power is sent to the TX
from the mains powered RX. This offers additional flexibility when
integrating and designing commercial AV systems.
Specification
- Supports uncompressed video/audio up to 10.2Gbps
- HDCP2.2 Compliant
- Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
- 4K/2K & 4K UHD signals can be transmitted up to 70m via CAT5e/6 and 100m via CAT6a/7
- 1080p signals can be transmitted up to 100m via CAT5e/6/6a/7
- Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
- 5-Play™ convergence: HDMI, LAN, POE & Control (IR & RS232)
- Supports 3D signals
- PoH received from the mains powered RX
| Inputs | 1x HDMI [1x HDMI Uncompressed AV and Data]
1x 9pin Dsub [1x RS-232 Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver] |
| Outputs | 1x RJ45 [1x HDBaseT HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
1x RJ45 [1x Ethernet (I/O) IP] |
| POE PSU: | PoH |
| Dimensions | 116mm [W] x 106mm [D] x 27mm [H] |
| Net Weight | 360g |
| Gross Weight | 680g |
Downloads
Manual