SDV-C2-RX UHD+ HDMI AV over IP Receiver

SKU: SDV-C2-RX

Overview

The SDV-C2-RX is designed for high-quality, IP routable, AV extension over a 10G IP Network with minimum latency. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K audio/video streams (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio can be transmitted in pass-through mode.

The use of high quality 10 Gigabit Ethernet ports and Cat.6A or better cable allows for point-to-point transmission of the video signal up to 100m. Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, USB 2.0, and Ethernet.

Specification

HDMI 2.0 and DVI 1.0 compatible
HDCP 2.2 and HDCP 1.x compliant
1 Cat.6A input
1 HDMI output
1 analog stereo input & 1 analog stereo output
2 USB 2.0 (Type-A) ports and 1 USB 2.0 (Mini-B) port
IP routable with minimum latency (requires optional IP Master Controller or control software)
Ultra-light compression, lossless for most content
Extension up to 100m in Point-to-Point mode (with Cat.6A cable)
Supports independent breakaway A/V matrix switching with minimum latency, video wall generation, and multi-view compositing (requires optional IP Master Controller/control software)
Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Bypass modes only)
Supports pass-through of audio formats including LPCM (up to 8 channels), Bitstream and HD Bitstream from HDMI or DP sources
Analog stereo audio extension, insertion and extraction (insertion and extraction requires optional IP Master Controller/control software
Unit can be powered directly by PoE when connected to a 10 Gigabit Ethernet (10GbE) switch that provides PoE (802.3at)
Basic configuration via front panel buttons with an OSD
Supports the use of an external control center (IP Master Controller) or control software to provide expanded functionality (Contact your authorized dealer for more information)

Inputs	1x RJ45 [1x SDVoE CAT HDMI & Propriety Data] 1x 3.5mm Stereo mini-jack [1x Analogue Stereo(L/R)] 1x 3.5mm Stereo mini-jack [1x Infra Red Receiver] 1x Phoenix (3 pin) [1x RS-232] 1x RJ45 [1x LAN Propriety Data] 1x USB Micro [1x Service Port Propriety Data]
Outputs	1x HDMI [1x HDMI Uncompressed AV and Data] 2x USB Type A [2x Propriety Data] 1x 3.5mm Stereo mini-jack [1x Analogue Stereo(L/R)] 1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
POE PSU:	PoE
PSU:	12V/3A
Dimensions	108mm [W] x 231mm [D] x 25mm [H]
Net Weight	700g
Gross Weight	1700g