SDV-CTRX SDVoE 4KUHD (6G) HDMI over CAT (10G) Transceiver

SKU: SDV-CTRX

Overview

The SDV-CTRX is designed to transmit, 4K HDR (6G) signals over a 10G IP Network with almost zero latency. Every Transceiver can be configured to function as either a Transmitter or a Receiver, providing additional flexibility for any installation. Using a sophisticated ultra-light compression (lossless for most content) it’s the perfect solution for extending 4KHDR video (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio can be transmitted in pass-through mode. Multiple control and data signals may also be transmitted along with the audio and video, including IR, (RS-232 Future Development) USB (for KVM) and Ethernet.

Multiple Transceivers may be combined with one or more 10-Gigabit Ethernet switches and the units can be used together to form a distributed video matrix, a multi-viewer system, or a video wall system adding to their flexibility in large event installations (Control Hardware Required). The built-in EDID and HDCP management offers additional installation flexibility. Basic configuration of the unit can be achieved via front panel buttons with an On-Screen Display (OSD). Advanced control requires optional control software and a LAN connection.

Specification

HDMI 2.0 and DVI 1.0 compatible
HDCP 2.2 and HDCP 1.x compliant
Can be configured to function as either a Transmitter or a Receiver
1 x HDMI and 1 x DisplayPort input
1 HDMI output (Functions as local monitor output in Transmitter mode)
1 x analogue stereo jack (switchable between input/output mode)
IP switchable with minimum latency (requires optional control hardware or control software)
Ultra-light compression, lossless for most content
Independent breakaway A/V matrix switching (requires optional control center or control software)
Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Genlock mode only)
Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI or DisplayPort sources
Analogue stereo audio extension, embedding and de-embedding (insertion and extraction requires optional control hardware or control software)
Bi-directional LAN, IR, RS-232 & USB 2.0 extension
Signal transmission interfaces with 10-Gigabit Ethernet switches via XFI, IEEE 802.3ae
Basic configuration via front panel buttons with an On-Screen Display (OSD)

Inputs	1x HDMI [1x HDMI Uncompressed AV and Data] 1x 3.5mm Stereo mini-jack [1x TX mode - analogue Stereo(L/R)] 1x 3.5mm Stereo mini-jack [1x Infra Red Receiver] 1x Phoenix (3 pin) [1x Reserved for future use RS-232] 1x RJ45 [1x GbE LAN Serving] 1x USB 3 Type B [1x Service Port Power & Data] 1x RJ45 [1x RX mode - SDVoE CAT HDMI & Propriety Data]
Outputs	1x HDMI [1x HDMI Uncompressed AV and Data] 1x 3.5mm Stereo mini-jack [1x RX mode - Analogue Stereo(L/R)] 1x 3.5mm Stereo mini-jack [1x Infra Red Emitter] 1x RJ45 [1x TX mode - SDVoE CAT HDMI & Propriety Data]
PSU:	12V/3A
Dimensions	231mm [W] x 108mm [D] x 25mm [H]
Net Weight	620g
Gross Weight	1400g

Downloads

Manual